On the sides, measure 12 inches from the bottom on each edge and mark. On the top of the sides, mark the center. If your side pieces are 11 1/4 inches standard for 12 inch boards this will be 5 5/8 inches from the edge. You can mark 5 5/8 inches from each side
While sanding my deck I discovered 3 boards with damage. Right now the deck is solid 20′ boards. Should I replace the whole length or just sections of the 3 boards? Also once sanded, what is the best oil based stain that has the least amount of color in it?
Want to build the best cornhole boards on your block? Here's everything you need to do just that!Before we begin, don't forget to follow MossBoards on Instagram to
Symptom: You want to paint your own car; you want to know what it takes to paint your own car; you need to be talked out of trying to paint your own car. Introduction “I want to paint my own car, can you tell me what's involved?” “Why can't I paint my own car?”
Photo 4: Predrill holes for easy installation Predrill and nail the frieze boards, driving two galvanized box nails into each stud. Hold the nails at least 3/4 in. from the edges. Drive the nailheads snug with the surface of the siding. Do not overdrive them. Apply caulk at